Powder Brakes /Clutches are proportional Torque devices. Torque is controlled by
varying the excitation current. Torque is strictly proportional to excitation.
These devices has minimal drag torque, i.e. at zero excitation, torque is minimal and near to zero. This devices are for high torque – low power applications.
Powder Brake & Clutches are manufactured by us in wide range Torque rating starting from tiny 0.3 KgM to massive 100 KgM, & comes in self cooled, forced cooled and water cooled models.. These devices come with matching electronics to meet your most exacting applications
Magnetic Particle Brakes & Clutches are popularly known as Powder brakes & clutches. These powder brakes & clutches are manufactured by us in wide range from tiny 0.3 KgM to massive 100 KgM torque range
These are manufactured in self cooled, forced air cooled & water cooled version. Powder brakes & clutches are real torque control device, meaning braking or clutching torque is strictly proportional to
excitation current,
The magnetic powder clutch and brake achieves at low control power a high torque being independent from the slip speed. It distinguishes itself by a simple construction, low weight and small required space. Due to this advantage the clutch / brake is used for the solution of many
technical problems. For the various applications also appropriate control devices are necessary. By changing the exciting power force, the torque to be transmitted can be adjusted infinitely variable in the range 1:30
The Powder Brakes & Clutches contain, as their name suggests, a magnetic powder. The electrical current passing through the coil generates a magnetic field, which changes the property of the powder, from free flowing condition at no excitation to solid rock condition at full excitation. Thus
producing a smooth braking torque through friction between rotor and stator. The Powder Brakes & Clutches produces their rated torque at zero speed. The element to be tested / Clutched, can be loaded at standstill to determine the starting torque.
Powder Brakes & Clutched are used as Unwind &
Rewind Torque control,
with Load CellS,
Dancer & Tension Control,
to maintain CONSTANT TENSION
POWDER DYNAMOMETERS, WATER COOLED Powder Brakes & Clutches manufacured as DYNAMOMETERS. as loading devices, to test prime movers such as ENGINES, MOTORS & Mechanical transmmission devices such as GEAR BOXES, BEARINGS, SHAFTS,
BELTS, etc.
PNEUMATIC BRAKES Pneumatic brakes or popularly called as air brake are manufactured in the widest range with electronics to match for continuous slip braking applications at medium power levels. These high-performance, dual disc brakes are characterized by their ability to perform right down to zero speed in open loop or closed loop modes of operation. Pneumatic brake offers wide range of torque proportional to air supply from 0.2 psi to max 90 psi.
DC Drives We manufacture DC Drives. DC Drives are in wide range from 0.5 HP to 500 HP, for various applications. In single phase, DC drives are available upto 7.5HP where as in three phase, DC Drives are available upto 500 HP. These drive are offered with our excusive products such as Centre wind Tension Control, Pull thru line speed control, Torque Control and standard speed control.
DC .Drive’s are offered in following mode: Synchronization Mode
Tension Control Mode
Current sharing Mode
Eddy Current Drives
Manufactured from 0.5 HP to 100 HP both in Integral design (fitted with flange mounted induction
motor and
Modular design without induction motor – having independent input & out put shaft
PNEUMATIC BRAKES 
EDDY CURRENT BRAKES & CLUTCHES 
